The IC695PSD140D is a versatile 40-watt power module from the PACSystems RX3i series manufactured by GE Fanuc (now Emerson Automation). The power module is designed to provide stable power in RX3i universal backplane systems and is suitable for load sharing and redundancy applications.

The following are the detailed features and specifications of the power module:
Input voltage range: 18 VDC to 30 VDC.
Output power: Total power is 40 watts, shared by all loads.
Output voltage: Available + 5.1VDC, + 24VDC (relay output, which can be used to output circuit power on the relay module) and + 3.3VDC output.
Quarantine: Input to backplane is not quarantined.
Wiring: Accept 14 AWG to 22 AWG, one wire per terminal.
LED indication: Includes power supply, P/S failure, overload and overtemperature indication.
Ambient conditions: Operating temperature range is 0 to 60°C, storage temperature range is -40 to +85°C, humidity is 5% to 95% non-condensing.
Agency certification: including UL, CE, ATEX, CCC, KC, Marine(ABS, BV, DNVGL), etc.
The IC695PSD140D power module occupies two backplane slots and can be used with other modules in the RX3i series. It also has overcurrent protection with electronic limits of 7 amps for 5.1 VDC output and 10 amps for 3.3 VDC output. In the event of an overload (including a short circuit), the power supply automatically shuts down. Because it is designed for redundant applications, this power supply locks “OFF” under failure conditions and does not automatically attempt to restart. The input power supply must be cycled to clear the lock fault.