Product introduction：

The D20 EME 2400-21004 is a substation control card manufactured by GE Grid Solutions as part of the D20 family of control modules. The control card is versatile enough to process and monitor critical data in the power system, including voltage, current, power, frequency, and phase, and to execute complex control logic such as relay protection algorithms, fault location, isolation, and recovery strategies, and optimize power distribution

The control card supports a variety of communication protocols such as IEC 61850, Modbus, DNP3, etc., ensuring seamless integration with SCADA systems, EMS and other automation devices
. The built-in high-speed processor and large memory allow it to process large amounts of data in real time, while storing critical event records and historical data

The D20 EME 2400-21004 is designed with a redundant architecture to improve system reliability and availability. It also includes security features such as encrypted communications, access controls, and security audits to protect power systems from malicious attacks and unauthorized access
. In addition, the control card is adaptable and capable of stable operation in the harsh environments of substations, including extreme conditions such as high temperature, low temperature, humidity and electromagnetic interference

The D20 control module consists of two detachable modules: the WESDAC D20K and the WESTERM D20K. The WESDAC D20K is responsible for processing the collected data and communicating with the main D20 processor, while the WESTERM D20K consists of terminal blocks for terminating field wiring
. D20K is a 32-point control output interface module, 32 output drivers can be configured according to different system requirements for a variety of hardware/software, to ensure the safe operation of the control output interface

The WESDAC D20ME 18-MAR-13 is an industrial Ethernet gateway module manufactured by GE Digital with a variety of functions, including protocol conversion, analog expansion, remote control and monitoring. The module CAN convert Modbus RTU/TCP, PROFIBUS DP/PA, CAN and other industrial protocols into Ethernet protocols, such as TCP/IP, UDP/IP, and realize the communication between different protocol devices

The module has high-precision and high-reliability analog input and output functions, which can realize high-precision signal conversion and processing. It uses high-performance circuit design and material selection to ensure high module reliability and stability to meet the needs of continuous operation of industrial processes
WESDAC D20ME 18-MAR-13 is simple in design, easy to install and use, and can improve work efficiency.

Provide a variety of communication interfaces, easy to connect and communicate with other devices, to achieve remote control and data transmission. In addition, the module is scalable and can be connected and combined with other devices to facilitate system integration and expansion

Usually, the module also has a safety function, which can detect abnormal or out-of-range signals and take appropriate measures to ensure the safety and stability of the system
. WESDAC D20ME 18-MAR-13 is widely used in industrial automation control systems, as well as in equipment or components with specific needs in specific industries or application areas

The WESDAC D20ME 18-MAR-13 is an industrial Ethernet gateway module manufactured by GE Digital with a variety of functions, including protocol conversion, analog expansion, remote control and monitoring. The module CAN convert Modbus RTU/TCP, PROFIBUS DP/PA, CAN and other industrial protocols into Ethernet protocols, such as TCP/IP, UDP/IP, and realize the communication between different protocol devices

The module has high-precision and high-reliability analog input and output functions, which can realize high-precision signal conversion and processing. It uses high-performance circuit design and material selection to ensure high module reliability and stability to meet the needs of continuous operation of industrial processes

WESDAC D20ME 18-MAR-13 is simple in design, easy to install and use, and can improve work efficiency. Provide a variety of communication interfaces, easy to connect and communicate with other devices, to achieve remote control and data transmission. In addition, the module is scalable and can be connected and combined with other devices to facilitate system integration and expansion

Usually, the module also has a safety function, which can detect abnormal or out-of-range signals and take appropriate measures to ensure the safety and stability of the system
. WESDAC D20ME 18-MAR-13 is widely used in industrial automation control systems, as well as in equipment or components with specific needs in specific industries or application areas

The WES5120 2340-21004 is a power module manufactured by General Electric (GE) and widely used in industrial automation control systems, such as GE’s Mark VIe wind turbine control system. It has a wide range of applications in wind power, oil and gas, chemical, power and manufacturing industries

The power module has the following features:

It can provide a stable DC power supply for PLC (programmable logic controller), I/O (input/output) modules, communication modules and other field equipment.
High quality power supply design and circuit protection ensure stable operation and long life in industrial environments.
Designed with power efficiency in mind to reduce energy consumption and operating costs.
Modular design, easy integration into existing control systems, easy maintenance and replacement.
May include overload protection, short circuit protection, overheat protection and other functions to prevent system damage caused by power failure.
Designed for use in industrial environments with a level of protection against vibration, dust and temperature changes.
Power modules are usually designed to be easy to install, usually installed in the control cabinet, and relatively simple to maintain

In addition, WES5120 2340-21004 May also have intelligent management functions such as remote monitoring and fault diagnosis, adopt energy-saving technology and long life design, use high-quality components, and extend service life
. The high efficiency, low noise and low EMI characteristics of this power module make it ideal for medical devices, and may find applications in the automotive and aviation fields

WEA13-13 2508-21001 is an industrial automation control module produced by General Electric (GE) company, specifically, it is an isolated analog output module
. This module provides isolated analog output signals, common output types include 0-10V, ±10V, 4-20mA, or 0-20mA, which can be used to control external devices such as motor drivers, valves, meters, or actuators
. The isolated output helps prevent noise or power surges on the signal lines from affecting the control system, while also avoiding current loops that can occur between different ground reference points, enhancing the overall stability of the system

Modules may have multiple independent analog output channels, each of which can be configured with a different output range to meet different control needs
. In addition, the WEA13-13 module may support a variety of industry standard protocols, such as Modbus, EtherCAT, Profinet, etc., for easy integration with various control systems
. Designed for industrial environments, it can withstand high temperature, vibration, electromagnetic interference and other harsh conditions to ensure stable operation in a variety of environments

Contact us freely

BeiLin

| Mobile/wechat：+86 18005021035

Email contact：18005021035@163.com

You may be interested