1C670CHS103 I/O base unit/Terminal for barrier
Compatibility Field control IC670, IC670CH, and IC670CHS
Rated voltage 115 V AC, 125 V DC
Voltage range 90 to 135 volts AC / 105 to 150 volts DC
Frequency 47 to 63 Hertz
Email:18005021035@163.com
Phone:+86 18005021035
Name:BeiLin
Content details
Product introduction:
Part number IC670CHS103
Type I/O base
Style connector, hot insert
Compatibility Field control IC670, IC670CH, and IC670CHS
Rated voltage 115 V AC, 125 V DC
Voltage range 90 to 135 volts AC / 105 to 150 volts DC
Frequency 47 to 63 Hertz
Power Supply 115 volts AC full load 48 volts amperes (Max)
125-volt AC power supply at full load 24W (Max)
Surge current 20 amps (peak), 3 ms (Max)
The power output is 6.5 volts DC
Retention time 20 ms (Max)
The Field control IC670CHS103 base is an I/O base unit designed for use with other field control units manufactured by GE Fanuc.
The I/O terminals that can be installed on the base unit include terminals for the barrier, which support the secure installation of the module to avoid the generation of incorrect data.
The IC670CHS103 base unit allows modules to be inserted and removed while powered on in a way that does not affect other devices installed on the I/O station. In other words, the module on the terminal can be replaced without turning off the power.
The IC670CHS103 base unit is compatible with field control units in the IC670, IC670CH and IC670CHS family.
The IC670CHS103 I/O base unit provides a variety of keyser locations for module installation and includes a kit with all the necessary keys and tools. The I/O terminals have keying slots and keying clips to facilitate easy module installation.
The IC670CHS103 base unit supports installation in Class I Zone 2 A/B/C/D group class environments, which are generally non-hazardous environments.
The device can also be used in hazardous areas, but it needs to be turned off before any operation, such as removing or replacing the module it is carrying.
The IC670CHS103 unit operates at 115 volts AC or 125 volts DC with an input frequency of 47 to 63 Hz. The unit consumes 48 volt-amps or 24 watts of power, depending on the type of power supply used.
The base unit has a peak surge current of 20 amps and a hold time of up to 20 milliseconds.
✔✔✔Our advantage
1.Deep discount
2.Special price, limited time special price
3.Fast delivery and one year warranty!
4.24/7 service and free online quotes
✔✔✔BeiLin
| Mobile/wechat:+86 18005021035
Email contact:18005021035@163.com
✔✔✔Learn more
IS210BAPAH1A Analog Processor module GE |
IS200JPDMG1A Mark VI printed circuit board GE |
IS200EPSMG2A Exciter Power Supply Module GE |
IS200JPDAG1A Mark VI printed circuit board GE |
IS200JPDHG1A Mark VI printed circuit board GE |
IS200JPDEG1A Mark VI printed circuit board GE |
IS200JPDPG1A Mark VI printed circuit board GE |
IS200JPDLG1A Mark VI printed circuit board GE |
IS2020RKPSG2A VME Power Supply Module GE |
IS200STCIH4A VME Power Supply Module GE |
IS200SHRAH2A DINrail TRBD ANLGIO board GE |
A413240 PC BOARD CIRCUIT BOARD MODULE ASSEMBLY METSO |
5SGY3545L0010 3BHB006485R0001 IGCT module ABB |
T8314 Trusted Fibre TX/RX Unit Ics Triplex |
MOX12-P3509 B 80026-173-23 POWER SUPPLY ABSOPULSE |
SIMATIC FIELD PG M4 portable computer SIEMENS |
PCCF-H64MS 64MB PLC Module YASKAWA |
IS210SAMBH1A CARD ASSEMBLY SAMBH BOARD GE |
IS200SRLYH2A printed circuit board GE |
IS200SPROH1A PPRO terminal board GE |
IS200TBCIH1B Terminal Board Contact GE |
IS200TRTDH1C Mark VI printed circuit board GE |
IS200TPROH1B protective termination card GE |
IS200TTURH1C termination board GE |