★★★Product detail：

6945-377 DCS(Distributed Control System) is an automation system for industrial production control, which is composed of multiple control stations and operating stations, which can realize centralized monitoring and decentralized control of the production process1
6945-377 DCS(Distributed control System) features are as follows:
High reliability :DCS adopts fault-tolerant design, when a computer fails, it will not cause the system to lose other functions. In addition, since the tasks undertaken by each computer in the system are relatively single, dedicated computers with specific structures and software can be used for the functions that need to be implemented, thereby improving the reliability of each computer in the system.
Openness :DCS adopts open, standardized, modular and serialized design, each computer in the system adopts local area network communication to achieve information transmission, and when it is necessary to change or expand the system function, the new computer can be easily connected to the system communication network or removed from the network, almost without affecting the work of other computers in the system.
Flexibility: The software and hardware configuration is carried out according to different process application objects through the configuration software, that is, the measurement and control signals and the connection relationship between them are determined, and the applicable control laws are selected from the control algorithm library and from the graphics
The library calls the basic graphics to form various monitoring and alarm screens required, so as to conveniently form the required control system. Easy maintenance: a single function of the small or micro special computer, with simple maintenance, convenient characteristics, when a local or a computer failure, can be replaced online without affecting the operation of the entire system, quickly eliminate the fault.
Coordination: Various workstations transmit various data through the communication network, and the entire system information is shared and coordinated to complete the overall function and optimization of the control system. Complete control functions: rich control algorithms, set continuous control, sequence control and batch control in one, can achieve cascades, feedforward, decoupling, adaptive and predictive control and other first control, and can easily add the required special control algorithms.

6945-377

6945-377 drive
The actuator consists of an electromagnet with an iron armature that rotates on a center shaft bearing and has a return spring that balances the armature’s magnetic force, which moves the armature in the stator as the DC current flows through the coil. This linear motion is converted to rotational motion by the crank arm, which is part of the output shaft.
The all-electric proportional actuator is compatible with all engines and can be installed anywhere in the engine.
The 8000 series torque range is:
DYNA 8000:1.4 N·m, set range 35
DYNA 8200:4.1 N·m, adjustable range 45°
DYNA 8400:7.3N·m, set range 459
Controls
The electronic controller is the data processing unit of the controller module. It contains electronic components that process the input signal from the magnetic encoder, which controls the motor at the desired speed of revolutions per minute set in the controller. Electronic Settings are provided on the controller so that the device can be adjusted in use if necessary.
8235-600.
F Series actuators
The 23-pin, standard Mnt, Standard shaft F-Series modular actuator is an electric bidirectional actuator with an integrated driver. The F-Series modular actuators are designed to be mounted on engines for various position control functions of reciprocating engines in industrial and highway service.
The robust bi-directional F-Series actuators use LAT(Limited Angle Torque) motor technology to drive actuators to position very quickly, with a voltage swing rate of about 80msec, compared to 160mSec or higher for competing technologies. The actuator CAN accept PWM, J1939 CAN, 4-20 mA or 0-5 Vdc position demand signals.
The F-Series is designed for engines with a variety of position control functions mounted on reciprocating engines and is ideal for road vehicles and stationary gas fuel generators or pumps. Electric actuators do not require hydraulics, pneumatics, grease or gear trains, making them extremely reliable. Moreover, it integrates electronic components, eliminating the need for a separate dedicated drive box

★★★Contact us

BeiLin

| Mobile/wechat：+86 18005021035

Email contact：18005021035@163.com.

★About Chengdu Sunshine Xi He

Chengdu Sunshine Xi He Electric Co., Ltd. specializes in selling the world’s major electrical brand products overseas direct procurement,

genuine inventory, price preferential after-sales warranty, complete models, the same product, not the same price and service.

Large supply of original imported DCS system accessories, PLC system accessories.

Main :ABB, GE Fanuco, Bentl Bentley, Triconex Invensys, Woodward Woodward, Foxboro, Foxboro,

Westinghouse /Emerson, Reliance Ryan, SchneiderModicon, A-B, HIMA dark horse, Motorola MOTOROLA,

Kollmorgen Kollmorgen Bosch/Rexroth/ Bosch Rixon, NI,YOKOGAWA Yokogawa, and other major brands of DCS system accessories,

robot system accessories, large servo system discontinued spare parts.

★ Perfect service

Order now for immediate delivery via DHL, UPS, Fedex, TNT

· Payment: 100% T/T of the goods in stock before delivery

· Warranty: New parts are guaranteed for 3 months

· Services: 24/7 online service

· Limited time discount, free online quotation, value discount

★  advantage

· More than 10 years of industry experience. Huge inventory system, strict quality inspection before the ship

· Short delivery time. Good price

· Professional integrity, complete accessories

· On-time delivery

· One-stop Supplier

· Good after-sales service

· Rapid transportation

· Selected

· Strict quality control