⇒Product introduction：

Schneider Electric’s C65N 1P C10 is a single-pole miniature circuit breaker with a rated current of 10A. This circuit breaker is commonly used for direct current circuits and is part of the C65N-DC series. It has a high breaking capacity, usually 6kA, which is suitable for occasions where DC circuit breakers are needed, such as solar energy systems, telecommunications base stations and other DC power systems

Internal accessory
Auxiliary contact: The contact connected mechanically with the main circuit of the circuit breaker and the closing mechanism is mainly used for the display of the circuit breaker and the closing state. It is connected to the control circuit of the circuit breaker through the closing of the circuit breaker to control or interlock its related electrical appliances. For example, output signals to signal lights, relays, etc. The rated current of the shell frame of the moulded case circuit breaker 100A is a single-break conversion contact, and 225A and above is a bridge contact structure, and the heating current is 3A. The rated current of the shell frame grade 400A and above can be installed with two normally open and two normally closed, and the heating current is 6A. The number of operating performance times is the same as the total number of operating performance times of the circuit breaker.
Alarm contact: The alarm contact is used for the circuit breaker accident, and this contact only acts when the circuit breaker breaks off. It is mainly used for free tripping when the load of the circuit breaker fails, such as overload short circuit or undervoltage. The alarm contact is converted from the original normally open position to the closed position, and the indicator or bell and buzzer in the auxiliary line are connected to display or remind the fault tripping state of the circuit breaker. Since the circuit breaker has not much chance of free trip due to load failure, the life of the alarm contact is 1/10 of the life of the circuit breaker. The operating current of the alarm contact generally does not exceed 1A.

C65N 1P C10

Shunt release: A shunt release is a release that is excited by a voltage source, and its voltage is independent of the main circuit voltage. Shunt release is a remotely operated switching attachment. When the power supply voltage is equal to any voltage between 70% and 110% of the rated control power supply voltage, the circuit breaker can be reliably broken. Shunt release is a short-time working system, the coil power time generally can not exceed 1S, otherwise the line will be burned. In order to prevent the coil from burning, a micro-switch is connected in series with the shunt trip coil. When the shunt trip coil is drawn through the armature, the micro-switch is converted from normally closed to normally open. Because the control line of the power supply of the shunt trip device is cut off, the shunt coil will not be energized even if the button is artificially held down, which avoids the burning of the coil. When the circuit breaker is closed again, the microswitch is returned to the normally closed position.
Undervoltage release: The undervoltage release is a release device that causes the circuit breaker to be disconnected with or without delay when its terminal voltage drops to a specified range. When the power supply voltage drops (or even drops slowly) to the range of 70% to 35% of the rated operating voltage, the undervoltage release device should operate. When the power supply voltage is equal to 35% of the rated operating voltage of the release device, the undervoltage release device should operate. The undervoltage release shall prevent the circuit breaker from closing; When the power supply voltage is equal to or greater than 85% of the rated operating voltage of the undervoltage releaser, the circuit breaker should be reliably closed under hot conditions. Therefore, when a certain voltage drop occurs in the power supply voltage of the protected circuit, the circuit breaker can be automatically disconnected to cut off the power supply, so that the load electrical appliances or electrical equipment below the circuit breaker are protected from undervoltage damage. When in use, the undervoltage release coil is connected to the power side of the circuit breaker, and the circuit breaker can be closed only after the undervoltage release is energized

⇒About Chengdu Sunshine Xi He

Chengdu Sunshine Xi He Electric Co., Ltd. specializes in selling the world’s major electrical brand products overseas direct procurement,

genuine inventory, price preferential after-sales warranty, complete models, the same product, not the same price and service.

Large supply of original imported DCS system accessories, PLC system accessories.

Main :ABB, GE Fanuco, Bentl Bentley, Triconex Invensys, Woodward Woodward, Foxboro, Foxboro,

Westinghouse /Emerson, Reliance Ryan, SchneiderModicon, A-B, HIMA dark horse, Motorola MOTOROLA,

Kollmorgen Kollmorgen Bosch/Rexroth/ Bosch Rixon, NI,YOKOGAWA Yokogawa, and other major brands of DCS system accessories,

robot system accessories, large servo system discontinued spare parts.

⇒Contact us freely

BeiLin

| Mobile/wechat：+86 18005021035

Email contact：18005021035@163.com

⇒What can we do for you?

1. All items are new.
2. Any enquiry will be answered within 1 hour.
3. We check them before shipping!

⇒About Frequently Asked Questions

Q: Are you a trading company or a manufacturer?
A: Yes, we are a trading company.

Q: Do you have stock or need to buy from another supplier?
A: We have a lot of inventory to sell and we have our own warehouse.

Q: Do you sell outdated products? Or even a very old product?
A: If there is a new model that needs to be replaced, we will recommend that you use the new model;
If the replacement is not easy, we will help check that the old car is in good condition.
If used or otherwise, we will tell you the truth.

Q: How long is your delivery time?
A: If the goods are in stock, it usually takes 2-3 working days. If the quantity is large,
It takes 5-7 business days after receipt of payment.
If it is not an ordinary product, it always takes 3-4 weeks to order.

⇒Company Services:

1. Fast delivery (1-7 days for stock products)

2. Rich experience (more than 10 years of sales experience)

3. Large inventory (various brands and overseas warehouses)

4. Quality insurance (1 year warranty product condition is clear)

⇒运输 

1. For stock items, we will ship them to you within 7 days of receipt of payment

2. We can ship all over the world via DHL, UPS, FEDEX, TNT and EMS.

3. If you have a shipping agent, please let us know before shipping.

4. We will pack the parts in strong boxes. If you have any special needs, please let us know.

5. We usually ship the goods before 4:30 p.m., after which we will send you the tracking number. It takes 7 to 15 days to receive the package.

6. Please email us when you receive the package.

7. When asking for shipping costs, please include all information, otherwise it will slow down the process.

1) What is your zip code?

2) If you have a company name and your name, what is your company name?

3) What is your phone number and extension (if any)?

⇒You may be interested