✦Basic product information：

GE DS200CDBAG1ABA contactor drive board Mark V DS200 DS200CDBAG1A

GE contactor drive board DS200CDBAG1ABA opens and closes the contactor. Before touching the board, make sure to disconnect the power supply to drive and test the board to make sure there is no power supply in the board. Also, do not remove the motherboard while the drive is powered on. Static electricity can damage the circuit board. Work on the board using a ground strip and store the board in a static protective bag.

The DS200CDBAG1ABA has a jumper. JP1 is a 3-pin jumper designed for factory testing only. Keep pins 1 and 2 covered for normal operation. When pins 2 and 3 are covered, it is reserved for factory use only. The DS200CDBAG1ABA also has a potentiometer for controlling the current flow applied to the contactor coil.

The DS200CDBAG1ABA also has test points that can be used to test circuit board operation. A test point is a common reference point for the board. A test point is a 15V DC test point based on a common reference point. One test point is the reference voltage of the contactor driver.

The connector 1TB on the DS200CDBAG1ABA board consists of four parts (1TBA, 1TBB, 1TBC and 1TBD). Carefully note the position of the connectors on the circuit board, then pry the parts open with a screwdriver. The connectors for the replacement board may be located in different locations, so care must be taken to insert these parts into the correct connector.

DS200CDBAG1ABA

FAQ about DS200CDBAG1ABA

Why does DS200CDBAG1ABA provide power?
The DS200CDBAG1ABA provides power to turn on and off contactors controlled by the DS200DCFB power board, DS200SDCI DC power supply and dashboard or feedback acquisition and power board. However, the DS200CDBAG1ABA can only operate one high-speed contactor at a time. The DDS200CDBAG1ABA is powered by 75-140 volts AC/DC, and the input power of the DS200CDBAG1ABA is fused by FU1.

Does DS200CDBAG1ABA have a potentiometer?
Yes, the DS200CDBAG1ABA includes an adjustable potentiometer for setting the contactor driver current. The DS200CDBAG1ABA has an RV1 potentiometer for controlling the current flow of the drive contactor coil, measured using test points REFA and ACOMA.

DS200CDBAG1ABA How to close the contactor?
The DS200CDBAG1ABA forces the contactor to close by applying 105 VDC 250 milliseconds to turn it off, and then the DS200CDBAG1ABA adjusts the contactor drive current to a level set by the potentiometer RV1 to keep the contactor closed.

✦About Chengdu Sunshine Xi He

Chengdu Sunshine Xi He Electric Co., Ltd. specializes in selling the world’s major electrical brand products overseas direct procurement,

genuine inventory, price preferential after-sales warranty, complete models, the same product, not the same price and service.

Large supply of original imported DCS system accessories, PLC system accessories.

Main :ABB, GE Fanuco, Bentl Bentley, Triconex Invensys, Woodward Woodward, Foxboro, Foxboro,

Westinghouse /Emerson, Reliance Ryan, SchneiderModicon, A-B, HIMA dark horse, Motorola MOTOROLA,

Kollmorgen Kollmorgen Bosch/Rexroth/ Bosch Rixon, NI,YOKOGAWA Yokogawa, and other major brands of DCS system accessories,

robot system accessories, large servo system discontinued spare parts.

✦Contact us freely

BeiLin

| Mobile/wechat：+86 18005021035

Email contact：18005021035@163.com

✦What can we do for you?

1. All items are new.
2. Any enquiry will be answered within 1 hour.
3. We check them before shipping!

✦About Frequently Asked Questions

Q: Are you a trading company or a manufacturer?
A: Yes, we are a trading company.

Q: Do you have stock or need to buy from another supplier?
A: We have a lot of inventory to sell and we have our own warehouse.

Q: Do you sell outdated products? Or even a very old product?
A: If there is a new model that needs to be replaced, we will recommend that you use the new model;
If the replacement is not easy, we will help check that the old car is in good condition.
If used or otherwise, we will tell you the truth.

Q: How long is your delivery time?
A: If the goods are in stock, it usually takes 2-3 working days. If the quantity is large,
It takes 5-7 business days after receipt of payment.
If it is not an ordinary product, it always takes 3-4 weeks to order.

✦You may be interested