FBM214 Digital HART frequency shift keying
Compact design
The FBM214 has a compact design with a rugged
Extruded aluminum exterior for physical protection
The circuit. Especially for
Mounting fbm offers different levels
Environmental protection, prop up the harsh environment
Email:18005021035@163.com
Phone:+86 18005021035
Name:BeiLin
Content details
Product introduction:
The FBM214 HART® communication input interface module provides eight input channels, each accepting
The 4 to 20mA analog signal or digital HART signal is superimposed on the 4 to 20mA analog input signal.
peculiarity
The main features of the FBM214 module are:
Eight analog input channels, each accepting one
Enter the following:
• Standard 4 to 20 mA analog sensor signal
• Digital HART Frequency Shift Keying (FSK)
The signal is superimposed at 4 to 20 mA for simulation
Input signal.
FSK modems are dedicated to each input channel
Two-way digital communication with a
HART field unit
Analog to digital conversion, every 4 to
20ma input signal from HART device
Supports HART generic commands
Field equipment must be combined with
I/A Series ® system database
8 inputs for the current isolation group
Channel from the ground and module logic
Compact, rugged design for housing
G3(Harsh) Environment
High precision with sigma-delta data
Conversion of each channel
Terminating assembly (ta)
Remotely connect field cabling to the FBM214
Terminal components inside each channel
And/or external loop powered transmitter.
summarize
FBM214 HART communication input port
The module contains eight isolation groups of 4 to 20 mA
Simulate the input channel. The FBM214 supports any
Blends of standard 4 to 20 mah devices and HART
Equipment.
FBM214 as HART communication field
Device host, make I/A series system
Request and receive two digital messages per second
Equipment from the field. Message passing
Capabilities available to support HART Universal,
Common practices and device-specific commands,
But not in burst mode. these
Command using Intelligent
Field Device Configurator (IFDC) – Reference
PSS 21S-8A3 B3 Details).
The FBM214 provides a universal isolated power supply
Power all 8 channels. Optionally,
The channel can be powered by an external power supply
Supplied. However, when a common external power source
Power is supplied with two or more channels, one cable
The Balun module is needed to prevent channel crossings
Talk.
Compact design
The FBM214 has a compact design with a rugged
Extruded aluminum exterior for physical protection
The circuit. Especially for
Mounting fbm offers different levels
Environmental protection, prop up the harsh environment
According to ISA standard S71.04.
Visual index
Light emitting diode (led) incorporation
The front of the module provides visual instructions
Module operating status, and communication
Activity on the channel.
Easy to remove/replace
You do not need to check when removing or replacing a module
Remove field equipment terminal cables, power supplies, or
Communication cable.
Fieldbus communication
Fieldbus communication module or controller
Processor interface redundant 2mbps module
Fieldbus used by fbm. FBM214 module
Receives traffic from path (A or B)
Redundant 2mbps fieldbus – if one of the paths fails
Or switch modules at the system level
Continue communication on the active path.
Use one external power source to share two
Or more cycles require cable balancing modules
Maintain the balance of communication signal lines.
Modular base mounting
The module is mounted on a modular base plate
It can accommodate up to 4 or 8 FBMS. the
Modular baseboards are DIN rail mounted or rack mounted
Install and include signal connectors
Redundant fieldbus, redundant independent DC
Power and terminal cables.
Termination assembly
The field input signals are connected via the FBM subsystem
DIN rail mounted TAs. ta used with The
FBM214 is described in Termination
Components and Cables “, page 8.
✔✔✔BeiLin
| Mobile/wechat:+86 18005021035
Email contact:18005021035@163.com
✔✔✔About Chengdu Sunshine Xi He
Chengdu Sunshine Xi He Electric Co., Ltd. specializes in selling the world’s major electrical brand products overseas direct procurement,
genuine inventory, price preferential after-sales warranty, complete models, the same product, not the same price and service.
Large supply of original imported DCS system accessories, PLC system accessories.
Main :ABB, GE Fanuco, Bentl Bentley, Triconex Invensys, Woodward Woodward, Foxboro, Foxboro,
Westinghouse /Emerson, Reliance Ryan, SchneiderModicon, A-B, HIMA dark horse, Motorola MOTOROLA,
Kollmorgen Kollmorgen Bosch/Rexroth/ Bosch Rixon, NI,YOKOGAWA Yokogawa, and other major brands of DCS system accessories,
robot system accessories, large servo system discontinued spare parts.
✔✔✔Our advantage
1.Deep discount
2.Special price, limited time special price
3.Fast delivery and one year warranty!
4.24/7 service and free online quotes
✔✔✔How to ship?
≈For goods that are available, we will place an order upon receipt of payment。
≈We can ship all over the world through SF Express and Federation.The packing is very strong.
If you have any special needs, please let me know
≈You can expect to receive the item approximately 7 days after we send it.