Product introduction：

FBM 233,10/100 MBPS Ethernet, redundancy, p/n –
p0926gx features
The main features of the Fbm233 include:
– Redundant 10mbps or 100mbps Ethernet network transmission rates with field devices
Transfer rate between – with up to 64 field devices
Communication – I/O software drivers can be downloaded from the available protocol library
– Up to 2000 dci block connections
– Use Ethernet connection
Integration of field equipment data into the i/a series control database – field installation
The g3 class (harsh) environment.

allocator
The FDSI configurator sets the FBM233 port and
Xml-based device configuration file. Harbor
Configurator allows easy setup
Communication parameters for each port (e.g.,
Dynamic host configuration protocol
IP address). No device configurator is required
For all devices, but when needed, it configures the device
Specific and point specific considerations (e.g.,
Scan rate, address of the data to be transferred, and
The amount of data to be transferred at a time
Transactions).

FBM233

Controls
A pair of FBM233 can connect to a maximum of 64 devices
Read and write data.
From the I/A series control station to
The FBM233 is connected (see Figure 1) until 2000
Distributed Control Interface (DCI) data connection
Can be used to read or write data. Supporting data
The type is determined by the specific driver being loaded
The FBM233 converts data to a DCI
The data types are as follows:
 Simulate input or output values (integer or IEEE)
Single precision floating point number)
 A single numeric input or output value
 Multiple (packaged) numeric input or output values
Each group has a maximum of 32 number points
Connect).
Thus, an I/A serial control station can access up to
2,000 analog I/O values, or up to 64,000 digital I/ OS
Value, or a combination of digital and analog values
Use FBM233. Frequency of access
FBM233 data through a control station can be like
500 ms. Performance depends on each one
Device type and layout of the data in the device

FBM233 is a control module for industrial automation control systems
The following are some of the main features and functions of the FBM233 control module:
Serial control: The FBM233 adopts serial control mode and can communicate with other devices or control systems through serial interfaces to achieve remote control and data exchange.
Strong anti-interference ability: the module adopts anti-interference design, which can effectively resist external interference and ensure the stability and reliability of the module.
Strong scalability: The FBM233 can be expanded according to actual requirements, and supports various types of input and output interfaces to meet the connection requirements of different devices.
Programmability: Users can configure and customize according to specific application requirements to achieve customized control logic and functions.
Data acquisition and signal processing: The FBM233 module can collect data from a variety of sensors, instruments and monitoring equipment, including analog and digital signals. At the same time, it also has the signal processing function, which can filter, amplify, digitize and calibrate the collected data to ensure the accuracy and reliability of the data.
Abundant communication interfaces: The FBM233 module is usually equipped with various communication interfaces, such as Ethernet, RS-232, and RS-485, for data communication with other devices and monitoring systems.
Data recording and storage: The module supports data recording and storage functions, and the collected data can be stored in internal memory or external storage devices for future analysis and reporting.
Real-time monitoring and remote access: The FBM233 enables real-time monitoring of equipment and system status, as well as monitoring of various key parameters, and timely identification of anomalies or faults. At the same time, some modules also have remote access functions, allowing users to remotely monitor and control the equipment.
Safety and reliability: The FBM233 provides overcurrent protection, overvoltage protection, and undervoltage protection to ensure the safety and reliability of the device and system.
Easy to use and maintain: provides easy-to-use configuration software and programming interfaces for easy development and maintenance.
The FBM233 control module can be widely used in various industrial fields, such as petrochemical, electric power, water treatment, metallurgy, etc., to meet the control needs of different industries. At the same time, due to its powerful processing power, flexible configuration options and user-friendly design, the FBM233 has become an important part of the industrial automation control system.

✔✔✔BeiLin

| Mobile/wechat：+86 18005021035

Email contact：18005021035@163.com.

✔✔✔About Chengdu Sunshine Xi He

Chengdu Sunshine Xi He Electric Co., Ltd. specializes in selling the world’s major electrical brand products overseas direct procurement,

genuine inventory, price preferential after-sales warranty, complete models, the same product, not the same price and service.

Large supply of original imported DCS system accessories, PLC system accessories.

Main :ABB, GE Fanuco, Bentl Bentley, Triconex Invensys, Woodward Woodward, Foxboro, Foxboro,

Westinghouse /Emerson, Reliance Ryan, SchneiderModicon, A-B, HIMA dark horse, Motorola MOTOROLA,

Kollmorgen Kollmorgen Bosch/Rexroth/ Bosch Rixon, NI,YOKOGAWA Yokogawa, and other major brands of DCS system accessories,

robot system accessories, large servo system discontinued spare parts.

✔✔✔Our advantage

1.Deep discount

2.Special price, limited time special price

3.Fast delivery and one year warranty!

4.24/7 service and free online quotes

✔✔✔How to ship?

≈For goods that are available, we will place an order upon receipt of payment。

≈We can ship all over the world through SF Express and Federation.The packing is very strong.

If you have any special needs, please let me know

≈You can expect to receive the item approximately 7 days after we send it.

✔✔✔more