✦Basic product information：

Part number IC660EPM100
Series Genius I/O modules
Part number IC660EPM100
Product Description Genius PowerTrac Electronic components
Product Description Power TRAC Block electronic components
Product description Electronic assembly
Rated voltage 115/230 volts AC
Compatible I/O module IC660BPM100 PowerTrac I/O module
Compatible block I/O IC660BPM100 PowerTRAC module
Compatible block IC660BPM100
Communication Genius I/O
LED indicator unit is normal; Enable I/O

IC660EPM100J

Communication interface Handheld display interface
Communication range up to 7,500 feet
Operating temperature 0 to +60 degrees Celsius (+32F to +140 degrees Fahrenheit)
Internal circuit signal conditioning, multiplexers, analog-to-digital converters (ADCs), processors, buffer circuits, communications
Power supply 115/230 VAC or 125 VDC
Storage temperature -40 C – 125 C (-40 C to +212 F) AB124
Humidity 5% to 95% (non-condensing)
Relative humidity 5% to 95%, no condensation
Operation shock 5 G, 10 ms duration, in accordance with MIL-STD 810C, Method 516.2
Weight 1 lb.
LED indicator: The unit is normal; Normal communication
Vibration 1.0 g 10-200 Hz

The IC660EPM100 is an electronic component that is part of the PowerTrac I/O Block module. This electronic component is a compatible replacement for existing electronic components of the same I/O module, making it easy to replace a failing module without interrupting existing I/O connections. The electronic assembly comprises a power supply circuit, signal conditioning, isolation and protection circuit of the module. The electronic component provides the power metering functions of the module, such as individual phase measurement of voltage, reactive power and current, including neutral lines of current; Reactive power; Effective system power factor; Total system KWH; System frequency; Low, normal and high ambient temperature states; Total harmonic power content per phase. The module is designed with input circuitry to accommodate nominal voltages of 115 VAC/230VAC, voltage ranges of 90-265VAC, and frequencies of 47-63 Hz; 125 VDC Nominal voltage, voltage range is 100-150VDC, maximum 35VA. The electronic assembly is connected to the terminal base for proper installation. The electronic components are aligned to the terminal base using shoulder screws as a guide rail. Gently push down the electronic assembly to connect the module. If you feel resistance, do not forcibly assemble the electronic components, make sure to re-align the terminal base, and check the socket and connector pins. After connecting the electronics, secure the device to the terminal base to form a single PowerTrac block. The electronic components are essentially the units that communicate with the CPU. Compatible CPU IC697CPU731G or later; IC697CPU771E or later; All versions of IC697CPUxxx; IC600 Series PLC CPU: Version 105 or higher; IC600 PLUS series PLC CPU rev.110 or later; IC655 Series PLC CPU rev.4.0 or later.

IC660EPM100J

GE Fanuc IC660EPM100 Electronics Assembly belongs to the Genius I/O series of power TRAC modules. It accepts 115 to 230 volts AC input power. It is compatible with the GE IC660BPM100 Genius Power Track Block for a variety of power monitoring applications. The electronic component is a microprocessor-based intelligent component in the power module system that performs arithmetic and logical operations to store and process the input wave signal. The IC660EPM100 Electronics Assembly can be easily plugged in and installed in the module without interfering with the module’s field wiring. The Genius I/O handheld monitor can be used to configure this electronic component module. When installing an I/O module, it is recommended to install it with the electronic components removed, or install the module first and then install the components onto the module.

The IC660EPM100 electronic assembly has the main electronic circuit in the block responsible for communication. It can use voltage and current input from the transformer. The configuration package can be used with a handheld monitor to configure modules and their components. It also has a 125 V DC voltage rating and a 5 amp current rating. The standard data rate of the assembly is 153.6 Kb, and the expansion rate is also 153.6 Kb. It establishes a handshake protocol for communication by sending 16 bits of status data and 36 bytes of calculation data. The IC660EPM100 Electronics Assembly also provides overcurrent by storing 128 sample values for each input

✦About Chengdu Sunshine Xi He

Chengdu Sunshine Xi He Electric Co., Ltd. specializes in selling the world’s major electrical brand products overseas direct procurement,

genuine inventory, price preferential after-sales warranty, complete models, the same product, not the same price and service.

Large supply of original imported DCS system accessories, PLC system accessories.

Main :ABB, GE Fanuco, Bentl Bentley, Triconex Invensys, Woodward Woodward, Foxboro, Foxboro,

Westinghouse /Emerson, Reliance Ryan, SchneiderModicon, A-B, HIMA dark horse, Motorola MOTOROLA,

Kollmorgen Kollmorgen Bosch/Rexroth/ Bosch Rixon, NI,YOKOGAWA Yokogawa, and other major brands of DCS system accessories,

robot system accessories, large servo system discontinued spare parts.

✦Contact us freely

BeiLin

| Mobile/wechat：+86 18005021035

Email contact：18005021035@163.com

✦What can we do for you?

1. All items are new.
2. Any enquiry will be answered within 1 hour.
3. We check them before shipping!

✦About Frequently Asked Questions

Q: Are you a trading company or a manufacturer?
A: Yes, we are a trading company.

Q: Do you have stock or need to buy from another supplier?
A: We have a lot of inventory to sell and we have our own warehouse.

Q: Do you sell outdated products? Or even a very old product?
A: If there is a new model that needs to be replaced, we will recommend that you use the new model;
If the replacement is not easy, we will help check that the old car is in good condition.
If used or otherwise, we will tell you the truth.

Q: How long is your delivery time?
A: If the goods are in stock, it usually takes 2-3 working days. If the quantity is large,
It takes 5-7 business days after receipt of payment.
If it is not an ordinary product, it always takes 3-4 weeks to order.

✦You may be interested