✔✔✔BeiLin

| Mobile/wechat：+86 18005021035

Email contact：18005021035@163.com

Product introduction：

The C660MLA020 is a Genius I/O module. The module is a combined analog I/O module with four (4) analog input channels accommodating 0-10 VDC, 10 VDC, 5 VDC, 0-5 VDC, 4-20 mA (or 1-5 VDC) input signals and two (2) analog output channels. Supports 0-10 VDC, 10 VDC, 5 VDC, 0-5 VDC, and 4-20 mA (or 1-5 VDC). It has an integrated converter circuit with a converter resolution of 12 bit resolution plus symbol.

The module is independently powered with input voltage of 18-56 VDC and nominal power supply of 24 VDC. It has embedded support for the Genius Bus protocol, allowing the module to exchange I/O data with the Genius Bus master station over the network. Each channel has an update rate of every 4 milliseconds with software-adjustable filter responses of 8, 16, 32, 64, 128, 256, 512 and 1024 milliseconds, respectively.
The input filter is used to stabilize the received input signal, limiting fluctuations and more usable readings. It also has a self-diagnostic function, capable of detecting underrange, overrange, high alarm and low alarm. It also has a configurable open output setting that allows the signal to go into underrange and overrange at the time of detection. The typical accuracy of IC660MLA020 is 0.2% of full scale, up to 0.5% of full scale.

The IC660MLA020 has an open housing design and therefore must be installed in the housing. The environment must be clean, free of air pollutants, and provide proper airflow. The module can be mounted face up or upside down. If used with multiple blocks, there must be a gap of at least 2 inches between the two.
The IC660MLA020 analog I/O module is a GE Fanuc I/O module with 4 input circuits, 2 output circuits, and 2 module versions.
It offers five analog power ranges, 0 to 10 volts DC, -5 volts DC to +5 volts DC, -10 volts DC to +10 volts DC, 0 to 5 volts DC, and 4 to 20 MA /1 to 5 volts DC.
The IC660MLA020 analog I/O module also provides independent scaling and fault reporting for individual input and output channels. The typical thermal drift of the module at 25 degrees Celsius is 10 PPM per degree Celsius. Users can use any GE Fanuc IC66 handheld monitor with this GE I/O module. It also provides advanced diagnostic capabilities to generate fault messages.

The IC660MLA020 analog I/O module can be used with a variety of input and output devices, such as buttons, relays, sensors, and industrial operator interfaces. To power the module, a 24 or 48 volt DC power supply can be used externally. The input circuit of the module is responsible for converting the received voltage or current value to a 12-digit digital value. The scaling tool can be used to convert the final value to engineering units.
The output channel provides an analog voltage or current value based on the converted digital value from the CPU. The IC660BBA020 analog I/O module has 2 status indicator leds on the panel. Since it is an open device, make sure that the module is installed in a protective housing. Installation area must be clean and free of corrosive elements. The power supply should be connected to terminals 6 and 7.

IC660MLA020

✔✔✔Our advantage

1.Deep discount

2.Special price, limited time special price

3.Fast delivery and one year warranty!

4.24/7 service and free online quotes

✔✔✔Learn more

✔✔✔How to ship?

≈For goods that are available, we will place an order upon receipt of payment。

≈We can ship all over the world through SF Express and Federation.The packing is very strong.

If you have any special needs, please let me know

≈You can expect to receive the item approximately 7 days after we send it.