Product introduction：

IC660BBA104 Technical specifications

Series Rx7i PAC system

Dimensions (H x W x D)8.83×3.56×4.42 inches

Block power supply, input range 93-132 VAC / 105-145 DC

Block power, nominal value 115 volts AC / 125 volts DC

Output resolution 6 microamps

Enter conversion time 16.6ms to 400ms(user optional)

Input signal resolution 1 microamp

Input signal 4-20 MA

Product Description Current source input/output block

Nooooo. Input quantity six (6)

Part number IC660BBA104

Brand GE Fanuc

Product Description Current source I/O module

Input accuracy 0.1% of full scale reading

Input resolution 1 microamp

Nooooo. Output quantity 2

Output accuracy 0.15% of full scale reading

Output resolution 6 microamps

Block power supply 115 volts AC / 125 volts DC

Cooling 12 watts

Status The LED device is normal and I/O is enabled

Block to block isolation 1500 volts

Isolation between groups 1500V valid value

Dimensions (H x W x D)8.83×3.34×3.91 inches

Weight 4 pounds

About IC660BBA104

The IC660BBA104 is a current source combined I/O module with six (6) input circuits consisting of four (4) analog input channels capable of receiving a 4-20 mA signal and two (2) output channels providing a 4-20 mA signal. In addition, the module has inter-group isolation, inter-block isolation and individual channel isolation of the input channel, with a rated voltage of 1500 V.

The IC660BBA104 input channel has an accuracy of 0.1% of full scale readings at 25 degrees Celsius, a resolution of 1 μA, user-configurable conversion times of 16.6ms to 400ms, and an overrange capacity of 0 mA to 25 mA. Each input channel is designed with individual diagnostic functions such as under/over range, high/low alarm and open circuit detection.

The IC660BBA104 output channel has an accuracy of 0.15% of the full scale reading and a resolution of 6 μA. The typical update frequency for each channel is 6ms to 8ms, with an overrange capacity of 0-24 mA. Similar to the input channel, each output channel is capable of internal diagnostics such as underrange, overrange, and feedback errors.

The IC660BBA104 is externally powered by a nominal input power supply of 115 VAC. It measures 8.83 inches (22.44 cm)x 3.34 inches (8.48 cm)x 3.91 inches (9.93 cm) and weighs 4 pounds (1.8 kg). This I/O module needs to be mounted on a housing that provides adequate protection for this device. This block I/O supports front-facing and upside-down mounting and must provide two (2) inches of clearance on all sides to promote sufficient airflow for natural cooling.

The GE IC660BBA104 current source I/O module has 1500 V block isolation for 1 minute, 1500 V RMS group isolation and 1500 V RMS input channel isolation. It is compatible with PCIM modules, QBIM modules, and all GE Genius bus controllers. It has a programmable conversion time that combines noise suppression levels with input resolution. Users can choose longer conversion times to improve input resolution. The individual output circuit is isolated from all other circuits within the module. The output channel uses a dual-channel 12-bit digital-to-analog converter while independently controlling the current in the 0 to 24 mA range. The IC660BBA104 current source I/O module can be easily configured using a handheld monitor by entering the device number/serial bus address and reference number. When the module is configured offline, make sure that a 75 ohm resistor is connected to the serial 1 and 2 terminals.

IC660BBA104 Frequently Asked Questions

How many input channels does IC660BBA104 have?

The IC660BBA104 has four (4) input channels and is designed to receive 4-20 mA signals.

Can IC660BBA104 also be run as an output module?

Yes. The IC660BBA104 has two (2) output circuits that provide a 4-20 mA signal.

What are the external power supply voltage requirements for IC660BBA104?

The IC660BBA104 is externally powered by 115VCA / 125VDC supply voltage.

Technical description of IC660BBA104

The IC660BBA104 current source I/O module is a 115 V AC/125 V DC I/O module of GE Fanuc. It has 4 inputs, 2 outputs, 2 status leds and 12 watts of heat dissipation.

✔✔✔Our advantage

1.Deep discount

2.Special price, limited time special price

3.Fast delivery and one year warranty!

4.24/7 service and free online quotes

 

✔✔✔BeiLin

| Mobile/wechat：+86 18005021035

Email contact：18005021035@163.com

 

✔✔✔Learn more

IS210BAPAH1A  Analog Processor module  GE

IS200JPDMG1A  Mark VI printed circuit board  GE

IS200EPSMG2A  Exciter Power Supply Module  GE

IS200JPDAG1A  Mark VI printed circuit board  GE

IS200JPDHG1A  Mark VI printed circuit board  GE

IS200JPDEG1A  Mark VI printed circuit board  GE

IS200JPDPG1A  Mark VI printed circuit board  GE

IS200JPDLG1A  Mark VI printed circuit board  GE

IS2020RKPSG2A  VME Power Supply Module  GE

IS200STCIH4A  VME Power Supply Module  GE

IS200SHRAH2A  DINrail TRBD ANLGIO board  GE

A413240  PC BOARD CIRCUIT BOARD MODULE ASSEMBLY  METSO

5SGY3545L0010 3BHB006485R0001 IGCT module  ABB

T8314  Trusted Fibre TX/RX Unit  Ics Triplex

MOX12-P3509 B  80026-173-23  POWER SUPPLY  ABSOPULSE

SIMATIC FIELD PG M4  portable computer  SIEMENS

PCCF-H64MS 64MB  PLC Module  YASKAWA

IS210SAMBH1A  CARD ASSEMBLY SAMBH BOARD  GE

IS200SRLYH2A   printed circuit board   GE

IS200SPROH1A  PPRO terminal board  GE

IS200TBCIH1B  Terminal Board Contact  GE

IS200TRTDH1C  Mark VI printed circuit board  GE

IS200TPROH1B  protective termination card  GE

IS200TTURH1C  termination board  GE

✔✔✔How to ship?

≈For goods that are available, we will place an order upon receipt of payment。

≈We can ship all over the world through SF Express and Federation.The packing is very strong.

If you have any special needs, please let me know

≈You can expect to receive the item approximately 7 days after we send it.