Product introduction：

Features:

LED indicator

(16) Discrete input

8.6K Typical value (reactive) Input impedance

250 VAC continuous isolation

The GE Fanuc IC670MDL240 discrete input module provides a set of 16 discrete inputs with LED indicators. The IC670MDL240 also features 8.6K typical (reactive) input impedance and 250 Vac continuous isolation.

The IC670MDL240 is a sixteen (16) channel discrete input module from the field control I/O module. The module is used to connect signal devices with two (2) states or binary operations, such as push button devices, limit switches, auxiliary contacts, proximity sensors, and other similar operating devices. The module operates as an expansion module and is mounted on the Bus Interface Unit (BIU) with a maximum current of 77 mA.

The IC670MDL240 input channel accepts a nominal signal voltage of 120 VAC in an input range of 0-132 VAC, and an input current of 15 mA per point at an input frequency of 47-63 Hz. The module has a typical input impedance of 8.6 KOhms with on-state voltages of 70 VAC to 120 VAC and off state voltages of 0-20 VAC. The on-state current is 5-15 mA, and the off state current is 0 mA to 2.5 mA. The module has an on response time of 12 ms with a typical maximum of 20 ms and a off response time of 25 ms (typical) with a maximum response time of 40 ms. The module must be supplied with an external 120 VAC power supply voltage to power the input devices connected to the IC670MDL240 split input module.

The IC670MDL240 is equipped with separate LED status indicators that describe the logical 0 and logical 1 states of the input channels. At logic 0, the input point receives the voltage and current at the off state level, while at logic 1, the input channel actively receives the voltage and current at the on state level, which causes the LED indicator to be activated. In addition, a dedicated PWR LED indicator is provided to describe the power received from the backplane.

GE Fanuc’s field control IC670MDL240 module is an input module with 16 packet input points. It runs on 120 volts AC and receives power from the BIU of the host system, but the input device needs to get power from an external power source rated at 120 volts AC. The IC670MDL240 module has leds on the top, which are located below the transparent material board. There is a PWR LED indicating the backplane power supply and a separate LED for each input to show if the input is on or off.

The BIU or bus interface unit that powers the GE field control IC670MDL240 input module also handles intelligent processing tasks for it. Intelligent processing responsibilities include configuring fault reports and entering default Settings, as well as providing the module’s 16-bit or 2-byte discrete input data to the host processor and/or the local processor. The IC670MDL240 input module receives its input filter from the input threshold generated by the capacitor and resistor network. This input module has an input voltage range of 0 to 132 volts AC and a frequency of 47 to 63 Hz. There is no isolation between the individual input points, but the isolation between input and logic and between input and frame ground is 250 volts AC continuously and 1500 volts AC for 1 minute.

IC670MDL240

IC670MDL240 Frequently Asked Questions

1. How many input groups does IC670MDL240 have?

The IC670MDL240 has a single input group.

2. What is the input signal voltage accepted by IC670MDL240?

The IC670MDL240 operates at an input signal voltage of 115 VAC(nominal).

3. What LED indicators are available for the IC670MDL240?

The IC670MDL240 has a separate channel indicator and PWR LED indicator.

1. How many input groups does IC670MDL240 have?

The IC670MDL240 has sixteen (16) discrete input channels.

2. What is the acceptable range of input voltage signals for IC670MDL240?

The IC670MDL240 accepts signal voltage ranges of 0-132 VAC and 47-63 Hz.

3. What is the current draw status of IC670MDL240?

The BUI power supply of the IC670MDL240 consumes 77 mA.

Technical description of IC670MDL240

The IC670MDL240 is a field control I/O module manufactured by GE Fanuc. The module is a discrete input module with sixteen (16) channels in a single group. It accepts 0-132 VAC input voltage range with a nominal input of 120 VAC and input current of 15 mA. The backplane current consumption of this module is 77 mA.

✔✔✔Our advantage

1.Deep discount

2.Special price, limited time special price

3.Fast delivery and one year warranty!

4.24/7 service and free online quotes

✔✔✔BeiLin

| Mobile/wechat：+86 18005021035

Email contact：18005021035@163.com

✔✔✔Learn more

✔✔✔How to ship?

≈For goods that are available, we will place an order upon receipt of payment。

≈We can ship all over the world through SF Express and Federation.The packing is very strong.

If you have any special needs, please let me know

≈You can expect to receive the item approximately 7 days after we send it.