Product introduction：

Part number IC670MDL330

Product description Separate output module

Nooooo. Number of channels 16 (16)

Product type output module

Output quantity 16

Output signal, nominal value 12-120 volts AC

Discrete output Yes

Output signal, range 10-132 volts AC

Voltage type AC

Output current 1 A per point; Each module is 4 A

Rated voltage 12 to 120 volts AC

The maximum current drawn from the BIU power supply is 275 mA

Rated current 1 amp

User input to logic, user input to frame ground isolation 1500 VAC for 1 minute; 250 VAC, continuous

Discrete output data 2 bytes or 16 bits

Output packet single group

Output response time 1/2 cycle

Protection built-in fuse for group protection; Separate RC buffer circuit

Maximum output voltage drop of 2.0 volts

Output leakage current less than 2 mA at 120 VAC (Max.)

About IC670MDL330

The IC670MDL330 is a discrete output module of GE Fanuc and belongs to the field control I/O family. The module primarily has sixteen (16) source output channels that are typically used to power electrical loads, such as solenoid valve drives, indicator lights, relay coils, and similar on/off devices. The module comes with a set of outputs, each offering a rated voltage of 10-120 VAC and an output voltage range of 10-132 VAC and 47-63 Hz.

Each channel of the module has a maximum output current of 1 amp, while the entire module is rated at 4 amp. Separate LED channel indicators allow the user to visually identify the power status of each channel in the module. It also has a normal fuse LED to indicate a blown fuse. The module has 250 VAC continuous and 1500 VAC 1 min user input to logic and user input to frame ground isolation.

The IC670MDL330 discrete output module output features include 1/2 cycle response time for On and Off signal conversion. Each output is equipped with a resistor/capacitor buffer circuit and a fuse for the output set. 10 amp surge current, maximum generated by the output channel at a single cycle duration or 20 m. The maximum rated load current of the module is 1.0 amps, 10 VAC-132 VAC, while the minimum load current is 10 mA per point.

The built-in fuses available in the module are replaceable. A suitable alternative is a 5 amp slow fuse with dimensions of 5 x 20 mm.

The GE Fanuc IC670MDL330 output module is a discrete output module that operates at AC voltages in the range of 12 to 120 volts AC with a current rating of 1 amp. The GE IC670MDL330 discrete output module is part of the GE Field Control family and features 16 output points. All outputs are arranged in a group, and each output has a corresponding LED that lets the user know if a particular output is on or off. The Bus interface Unit (BIU) or other part of the field control system can perform the interface tasks of the IC670MDL330 discrete output module. These interface responsibilities include fault reporting and default Settings configuration for all output.

The GE Fanuc IC670MDL330 discrete output module comes with 2-byte or 16-bit discrete output data, and the bus interface unit can be used to obtain this discrete output data from a local processor and/or host device. The bus interface unit provides logical power for the IC670MDL330 discrete output module and sends output data to the module in serial format. During transmission, the IC670MDL330 discrete output module automatically loops serial output data back to the bus interface unit for verification. If the IC670MDL330 module requires data to be in parallel format, the serial-to-parallel converter device can also be used to convert this data to parallel format.

IC670MDL330 Frequently Asked Questions

1. What is the output voltage of IC670MDL330?

The output voltage of the IC670MDL330 is 10-132 VAC, 47-63 Hz.

2. Does the IC670MDL330 come with separate channel protection?

Yes. The IC670MDL330 has RC buffer circuit protection for each output module.

3. Does the IC670MDL330 have a built-in fuse

Yes. The IC670MDL330 has A 5 A slow fuse that can be replaced.

Technical description of IC670MDL330

GE Fanuc’s IC670MDL330 split output module has 16 output modules and uses AC power. Its current rating is 1 amp and the voltage range is 12 to 120 volts AC.

✔✔✔Our advantage

1.Deep discount

2.Special price, limited time special price

3.Fast delivery and one year warranty!

4.24/7 service and free online quotes

 

✔✔✔BeiLin

| Mobile/wechat：+86 18005021035

Email contact：18005021035@163.com

 

✔✔✔Learn more

IS210BAPAH1A  Analog Processor module  GE

IS200JPDMG1A  Mark VI printed circuit board  GE

IS200EPSMG2A  Exciter Power Supply Module  GE

IS200JPDAG1A  Mark VI printed circuit board  GE

IS200JPDHG1A  Mark VI printed circuit board  GE

IS200JPDEG1A  Mark VI printed circuit board  GE

IS200JPDPG1A  Mark VI printed circuit board  GE

IS200JPDLG1A  Mark VI printed circuit board  GE

IS2020RKPSG2A  VME Power Supply Module  GE

IS200STCIH4A  VME Power Supply Module  GE

IS200SHRAH2A  DINrail TRBD ANLGIO board  GE

A413240  PC BOARD CIRCUIT BOARD MODULE ASSEMBLY  METSO

5SGY3545L0010 3BHB006485R0001 IGCT module  ABB

T8314  Trusted Fibre TX/RX Unit  Ics Triplex

MOX12-P3509 B  80026-173-23  POWER SUPPLY  ABSOPULSE

SIMATIC FIELD PG M4  portable computer  SIEMENS

PCCF-H64MS 64MB  PLC Module  YASKAWA

IS210SAMBH1A  CARD ASSEMBLY SAMBH BOARD  GE

IS200SRLYH2A   printed circuit board   GE

IS200SPROH1A  PPRO terminal board  GE

IS200TBCIH1B  Terminal Board Contact  GE

IS200TRTDH1C  Mark VI printed circuit board  GE

IS200TPROH1B  protective termination card  GE

IS200TTURH1C  termination board  GE

✔✔✔How to ship?

≈For goods that are available, we will place an order upon receipt of payment。

≈We can ship all over the world through SF Express and Federation.The packing is very strong.

If you have any special needs, please let me know

≈You can expect to receive the item approximately 7 days after we send it.