★★★Product detail：

Product description analog output module
Number of channels Four (4) Output channels
Part number IC697ALG320
Series 90-70 series
Analog output signal 0-20 MA / 4-20 MA; -10VDC / +10 VDC
Product description analog output module
Part number IC697ALG320
Nooooo. Output quantity 4 Output
Output Range Output range: Voltage: -10 volts to +10 volts (default) Current: 0.0 mA to 22.5 mA (default: 4 to 20 mA)
Nooooo. Output quantity 4 Output
Voltage output range -10 to +10 volts
The analog output resolution is 16 bits, with 14-bit monotonicity 312.5 microvolts /LSB stepping on-voltage
Voltage output range -10 to +10 volts
Conversion rate 2.0 ms
Max, no. Number of output channels 252 channels
The resolution has 16 bits of 14-bit monotonicity
Analog output accuracy: Voltage: Factory set full scale = 10 volts C2.5 millivolts. Current: Factory Settings are 4.0 mA C5μA and 20 mA C 5μA. At full scale, the field side voltage is 24.0 VDC.
Calibrate factory Settings to 10 volts +/ -2 mV
Users currently consuming 1.66A (8.3 Watts) at 5VDC must provide a maximum of 150 mA DC user power for current output
Product life cycle downtime/obsolescence
Power requirements 1.66 amps (8.3 Watts) at +5 volts
External supply voltage range 10 to 30 VDC (typical value is 24 VDC)
Module width 1 slot

IC697ALG320

The IC697ALG320 is an advanced analog output module for the 90-70 series programmable logic controllers (PLCS), previously manufactured by GE Fanuc, not Emerson Automation. The module is designed to occupy A single slot on a 5-slot or 10-slot baseboard and draws a maximum current of 1.66A (8.3 Watts) (5VDC) from the backplane and 150 mA from the user’s power supply to enable current output. The IC697ALG320 is equipped with four (4) individually configured output channels specifically designed to generate voltage and current outputs, 0-20 mA / 4-20 mA current output signals, and -10VDC / + 10VDC voltage output signals. It has a built-in digital-to-analog converter (DAC) circuit with a 16-bit resolution and monotonia, with voltages of 312.5 microvolts per LSB step and 0.5 microamps per LSB step from 4 to 20 mA. It has a maximum conversion rate of 2.0 ms for all analog output channels. The module is calibrated at the factory using calibration data stored in the module’s EEPROM. It also has a continuous short-circuit function that does not cause any damage, and once the fault is resolved, the output will automatically return to the normal state. Analog output load specifications include a minimum of 2000 ms for resistive loads and a maximum of 1000 picometres for capacitive loads (configured for voltage operation). For current operation, resistive loads have output load specifications up to 700 ohms; The maximum capacitive load is 1.0 microfarad and the maximum inductive load is 250 millihenri. The accuracy of the module is affected by a specific temperature coefficient, the voltage is 25 PPM per degree Celsius, and the current operation is 50 ppm per degree Celsius.

The IC697ALG320 analog output module is a 4-channel analog output module manufactured by GE Fanuc. The module’s four outputs can be individually configured for voltage or current operation. It provides bipolar or unipolar outputs with 16-bit resolution and 14-bit monotonicity. The update rate of the output is 2 milliseconds. It consumes a maximum power of 1.66 amps (8.3 Watts) at +5 volts, and the recommended operating voltage for this output module is 24 volts DC. Some of the module’s features include fast update rates, individually configurable output channels for individual user scaling, factory calibration, and isolated output circuits. The IC697ALG320 analog output module also provides diagnostic functions such as out-of-range and off-range detection, open circuit detection, configuration error detection, and module health detection.

The GE IC697ALG320 analog output module is designed for the GE 90-70 series programmable logic controllers. The basic function of the module is to receive digital data from the control processing unit and perform digital-to-analog conversion to output analog signals. It ensures that the output is protected from overvoltage and transient conditions. It stores calibration data in its non-volatile EEPROM. Users can connect multiple IC697ALG320 output modules to archive up to 252 output channels. You are advised to connect a CPU rack to a maximum of seven modules and an extension rack to a maximum of eight modules. Configuration software can be installed on a PC to perform output range selection, user scaling, and fault reporting. User scaling provides the ability to easily convert output data into different units depending on the needs of a particular controller and application.

★★★Contact us

BeiLin

| Mobile/wechat：+86 18005021035

Email contact：18005021035@163.com.

★Perfect service

Chengdu Sunshine Xi He Electric Co., Ltd. specializes in selling the world’s major electrical brand products overseas direct procurement,

genuine inventory, price preferential after-sales warranty, complete models, the same product, not the same price and service.

Large supply of original imported DCS system accessories, PLC system accessories.

Main :ABB, GE Fanuco, Bentl Bentley, Triconex Invensys, Woodward Woodward, Foxboro, Foxboro,

Westinghouse /Emerson, Reliance Ryan, SchneiderModicon, A-B, HIMA dark horse, Motorola MOTOROLA,

Kollmorgen Kollmorgen Bosch/Rexroth/ Bosch Rixon, NI,YOKOGAWA Yokogawa, and other major brands of DCS system accessories,

robot system accessories, large servo system discontinued spare parts.

★Our advantage

· More than 10 years of industry experience. Huge inventory system, strict quality inspection before the ship

· Short delivery time. Good price

· Professional integrity, complete accessories

· On-time delivery

· One-stop Supplier

· Good after-sales service

· Rapid transportation

· Selected

· Strict quality control