✔✔✔BeiLin

| Mobile/wechat：+86 18005021035

Email contact：18005021035@163.com

Product introduction：

The IS200TBAIS1C is a safety certified analog input/output terminal board. The TBAI consists of three DC-37 pin connections for connecting I/O processors. A single connector is used to accommodate simplex applications (JR1).
All three connectors are compatible with TMR applications. In TMR applications, input signals from the R, S, and T controls are fanned into three connections.
The TMR output aggregates the currents of the three connected output drivers and uses a measuring shunt to calculate the total current.
The total current signal is then provided to the I/O processor in order to adjust to the required setpoint. TBAIS1C is a safety certified product. In Mark VIeS SIS,
YAIC does not support the 200 mA output option. TMR applications can use the same terminal board. IS200TBAIS1C Installation TBAI can accommodate the following analog I/O types: analog input, two-wire transmitter; Analog input, three-wire transmitter; Analog input, four-wire transmitter; 5 V, 10 V DC analog input 0-20 mA Analog Output 0-200 mA Analog output IS200TBAIS1C operation Each 24 V DC power output has a rated continuous output of 21 mA and short-circuit operation protection.
The control system’s 24 V DC power supply can power the transmitter/transmitter, or it can be powered separately. The JO jumper determines the current output type.
Each output is monitored by a diagnostic, and if the processor’s commands fail to clear the fault, a suicide relay in the I/O controller disconnects the relevant output. Physical feature Fault detection Monitors the total output current.
Use the connection ID chip to check for hardware incompatibility. Temperature range -30 C to 65 C Dimensions: Wide 10.16 cm, high 33.02 cm Diagnostic I/O controllers ask for individual ID devices for each cable connector on the patch board.
The ID device is a read-only chip, encoded by the terminal board serial number, board type, revision number, and JR, JS, and JT connection position.
When the I/O controller reads this chip and finds a mismatch, it issues a hardware incompatibility fault.
Configuration The following are the options for jumpers: Jumpers J1A to J8A allow you to choose between current and voltage inputs.
Jumper J1B to J8B determines if the return is with a public link. Use jumper J9A and J10A to select between 1 mA and 20 mA input currents.

IS200TBAIS1C

✔✔✔Our advantage

1.Deep discount

2.Special price, limited time special price

3.Fast delivery and one year warranty!

4.24/7 service and free online quotes

✔✔✔Learn more

✔✔✔How to ship?

≈For goods that are available, we will place an order upon receipt of payment。

≈We can ship all over the world through SF Express and Federation.The packing is very strong.

If you have any special needs, please let me know

≈You can expect to receive the item approximately 7 days after we send it.