⇒Product introduction：

Function description
The IS210SAMBH2A is an acoustic monitoring terminal board developed by GE. It is part of the Mark VIe control system. The Mark VIe Acoustic Monitoring terminal board is a dual terminal board that provides 18 inputs to the acoustic monitoring system. Each input channel has two wiring points for a total of 18 channels across 36 terminals. It also has 18 buffered outputs on 36 terminals for connecting external instruments to monitor the AC voltage signal representing the dynamic pressure signal of the burner. Protects against extremely high frequency noise generated by external sources and includes passive electromagnetic interference (EMI) filters.

trait
18 acoustic monitoring signal interface channels, supporting dedicated dual channels
Channels 1-9 can support PCB piezoelectric sensor or charge converter signal amplifier (CCSA) output. The sensor power of the PCB sensor is separate from the sensor power of channels 10-18.
Channels 10 to 18 can be programmed to support PCB piezoelectric sensors or CCSA outputs. The sensor power of the PCB sensor is independent of the sensor power of channels 1-9.
18 buffered outputs provide dynamic pressure signal AC signal content without DC bias voltage.
36 European connection points for customer input
36 European junction points for buffering output
EMI shielding for all inputs
EMI filter input is allocated to slots A and B

IS210SAMBH2AA

Install
The hardware jumper connects the constant current source to the SIGx line of the PCB sensor. JPx is the hardware jumper on each channel (where x is equal to the input number). If using GE CCSA for Endevco sensors or any other voltage output device, the jumper should be in the CCSA position.
If a PCB sensor or other current output device is used, the jumper should be in the PCB position.
Controls
The CCSA sends an AC voltage signal proportional to the dynamic pressure induced by the Endevco pressure sensor. It receives the dynamic pressure directly from the PCB pressure sensor as the AC voltage of the DC bias voltage.
Each channel provides a constant current source for the PCB sensor, which can be connected to SIGx (where x is the channel number). JPx (where x equals the channel number) is a bipolar jumper that controls the constant current power supply and whether RETx is connected to the power grounding PCOM. When JPx is in the CCSA position, the constant current is turned off and RETx is disconnected from PCOM.
When the JPx is on the PCB, a constant current is connected to the SIGx, providing about 3 mA of current to power the PCB sensor. To provide a return path of constant current, the RETx line is connected to PCOM.

⇒About Chengdu Sunshine Xi He

Chengdu Sunshine Xi He Electric Co., Ltd. specializes in selling the world’s major electrical brand products overseas direct procurement,

genuine inventory, price preferential after-sales warranty, complete models, the same product, not the same price and service.

Large supply of original imported DCS system accessories, PLC system accessories.

Main :ABB, GE Fanuco, Bentl Bentley, Triconex Invensys, Woodward Woodward, Foxboro, Foxboro,

Westinghouse /Emerson, Reliance Ryan, SchneiderModicon, A-B, HIMA dark horse, Motorola MOTOROLA,

Kollmorgen Kollmorgen Bosch/Rexroth/ Bosch Rixon, NI,YOKOGAWA Yokogawa, and other major brands of DCS system accessories,

robot system accessories, large servo system discontinued spare parts.

⇒Contact us freely

BeiLin

| Mobile/wechat：+86 18005021035

Email contact：18005021035@163.com

⇒What can we do for you?

1. All items are new.
2. Any enquiry will be answered within 1 hour.
3. We check them before shipping!

⇒About Frequently Asked Questions

Q: Are you a trading company or a manufacturer?
A: Yes, we are a trading company.

Q: Do you have stock or need to buy from another supplier?
A: We have a lot of inventory to sell and we have our own warehouse.

Q: Do you sell outdated products? Or even a very old product?
A: If there is a new model that needs to be replaced, we will recommend that you use the new model;
If the replacement is not easy, we will help check that the old car is in good condition.
If used or otherwise, we will tell you the truth.

Q: How long is your delivery time?
A: If the goods are in stock, it usually takes 2-3 working days. If the quantity is large,
It takes 5-7 business days after receipt of payment.
If it is not an ordinary product, it always takes 3-4 weeks to order.

⇒Company Services:

1. Fast delivery (1-7 days for stock products)

2. Rich experience (more than 10 years of sales experience)

3. Large inventory (various brands and overseas warehouses)

4. Quality insurance (1 year warranty product condition is clear)

⇒运输 

1. For stock items, we will ship them to you within 7 days of receipt of payment

2. We can ship all over the world via DHL, UPS, FEDEX, TNT and EMS.

3. If you have a shipping agent, please let us know before shipping.

4. We will pack the parts in strong boxes. If you have any special needs, please let us know.

5. We usually ship the goods before 4:30 p.m., after which we will send you the tracking number. It takes 7 to 15 days to receive the package.

6. Please email us when you receive the package.

7. When asking for shipping costs, please include all information, otherwise it will slow down the process.

1) What is your zip code?

2) If you have a company name and your name, what is your company name?

3) What is your phone number and extension (if any)?

⇒You may be interested