✦Basic product information：

specification
Part number: IS215WEPAH2B
Manufacturer: General Electric
Series: Mark VIe
Product type: Printed circuit board
COM port: 3; COM1, COM2 and micro 9-pin socket D connectors
Ethernet interface: 10BaseT/AUI connector
Manual: GEP-9145
Relative humidity: 10-95%, no condensation
Impact: Maximum 10G, non-working
Female plug connectors: 2 metal oxide varistors
Quantity: 4
Power rating: 125 VDC
Software frame rates: 10, 20, and 40 milliseconds
Storage temperature: -40 to +70 degrees Celsius

IS215WEPAH2B

As with any similar GE Energy Mark VIe series printed circuit board; The IS215WEPAH2B has a number of unique hardware components that help fulfill its intended function as a wind energy pitch axis. A key component in maintaining this functionality is the input and output types of the IS215WEPAH2B board, which comes in several types. The types of I/O on the substrate of this WEPA acronym for Wind Energy Pitch Axis include:

A total of 8 analog inputs
1 incremental encoder input
A separate analog input
A total of 20 discrete inputs
A total of 2 discrete outputs
9 relay outputs
Two RS-485 ports
2 pulse width modulation control outputs

trait
The terminal block, terminal block, and I/O package are the three basic components of the Mark VIe I/O module. The terminal board is connected to the cabinet in two basic configurations: S and T.
Each I/O point of the S-board has a set of screws that allow the signal to be conditioned and digitized using a single I/O package. The board uses single board, double board, or triple board for single board, double board, and dedicated triple module redundancy (TMR) inputs. Typically, T-type TMR boards will input fan fans into three separate I/O packages. The output of the three I/O packets is usually voted on by the T-board hardware.
WEPA Bug fix

IS215WEPAH2B

22326 – This bug fix addresses an issue that previously required several attempts to read RPM in manufacturing test mode for it to work properly. This fix ensures that the speed reading runs correctly on the first attempt, improving the efficiency and accuracy of the manufacturing test process.
27250 – In this bug fix, Automatic mode drop adds a delay, making sure it is greater than the timeout of HeartbeatOk condition MainsOn. This modification ensures that the controlled feather action will be properly triggered in the event of a communication interruption due to a power failure.
31665 – This bug fix addresses an issue in serial loopback operations in manufacturing test mode. It involves clearing all internal buffers before starting the operation, ensuring that the serial loopback operation is running properly, and providing accurate results during manufacturing testing.
31892 – Improved by adding a corrected RMS motor torque calculation input. This enhancement ensures accurate and reliable calculation of RMS motor torque, which helps to control and monitor motor torque more precisely.
31895 – This bug fix involves braking and field tracking fault changes. They are now based on the percentage of their respective resistance, making them sensitive to the Nm (Newton-meter) setting of the variable pitch system. This tuning enhances fault detection capabilities for better monitoring and diagnosis of braking and field tracking issues.
31936 – The overall speed reference limit and overspeed Settings for managed parameter mode (UseConfigParms = false) have been updated based on the drive ratio. This update improves speed control and system performance by ensuring that speed reference limits and overspeed Settings are properly adjusted taking into account specific transmission ratios.
32049 – This bug fix focuses on enhancing speed profiles and speed tuning. These modifications are intended to bring the speed feedback closer to the controlled feather profile, thereby reducing the likelihood of switching to battery spacing. This improvement contributes to smoother operation and better synchronization between the speed feedback and the controlled feather profile.
32078 – Bug fix enables 45Nm PitchSysType systems to work with WEPA boards that support new 45Nm features. This allows for compatibility and seamless integration between the 45Nm PitchSysType system and the corresponding WEPA board, ensuring optimal performance and functionality.
32117 – In this bug fix, the standby mode has been modified to increase the brake setting delay to 1.2 seconds, specifically to accommodate 45Nm braking. This adjustment ensures that the brake setting delay is suitable for the 45Nm brake, maintaining the required safety and operating standards.

✦About Chengdu Sunshine Xi He

Chengdu Sunshine Xi He Electric Co., Ltd. specializes in selling the world’s major electrical brand products overseas direct procurement,

genuine inventory, price preferential after-sales warranty, complete models, the same product, not the same price and service.

Large supply of original imported DCS system accessories, PLC system accessories.

Main :ABB, GE Fanuco, Bentl Bentley, Triconex Invensys, Woodward Woodward, Foxboro, Foxboro,

Westinghouse /Emerson, Reliance Ryan, SchneiderModicon, A-B, HIMA dark horse, Motorola MOTOROLA,

Kollmorgen Kollmorgen Bosch/Rexroth/ Bosch Rixon, NI,YOKOGAWA Yokogawa, and other major brands of DCS system accessories,

robot system accessories, large servo system discontinued spare parts.

✦Contact us freely

BeiLin

| Mobile/wechat：+86 18005021035

Email contact：18005021035@163.com

✦What can we do for you?

1. All items are new.
2. Any enquiry will be answered within 1 hour.
3. We check them before shipping!

✦About Frequently Asked Questions

Q: Are you a trading company or a manufacturer?
A: Yes, we are a trading company.

Q: Do you have stock or need to buy from another supplier?
A: We have a lot of inventory to sell and we have our own warehouse.

Q: Do you sell outdated products? Or even a very old product?
A: If there is a new model that needs to be replaced, we will recommend that you use the new model;
If the replacement is not easy, we will help check that the old car is in good condition.
If used or otherwise, we will tell you the truth.

Q: How long is your delivery time?
A: If the goods are in stock, it usually takes 2-3 working days. If the quantity is large,
It takes 5-7 business days after receipt of payment.
If it is not an ordinary product, it always takes 3-4 weeks to order.

✦You may be interested