Product introduction：

These agreements may be related to LDS TA-01.
Lidar x1 communication protocol:
Lidar x1 LiDAR communicates with external devices via UART TTL level and supports simplex communication only.
The communication frame consists of frame header, frame length, frame type, command word, parameter length, parameter and check code.
All data is in hexadecimal format, and the information in the communication frame is used for the liDAR to actively upload measurement information and fault information.
LDS Series communication Protocol -RTU mode:
The communication protocol of LDS series water leakage detection system adopts Modbus communication protocol.
The message frame includes device address, function code, data, CRC16 check code and so on.
The supported function codes include read hold register, read input register, preset single register, preset multiple register, etc.
LDS Opcodes Communication Protocol:
RS485 communication, baud rate 9600, 8-bit data, 1 start bit, 1 stop bit, no parity check.
The communication protocol is an 8-byte packet, and the checksum is the sum of 8-bit 2’s complement in bytes 1 to 7.
SEN0492 Laser ranging sensor RS485 communication protocol:
The sensor adopts Modbus-RTU communication protocol.
Baud rate Optional. The default value is 115200.
Supported commands include read commands (0x03) and write commands (0x06).

LDSTA-01

​Application scenario related:
​Automated robots: In automated robots, the LDS TA-01 may be used as part of a sensor or controller to monitor the robot’s status or control its movement.
​Industrial Automation: In manufacturing and industrial automation, this model may be used to control machines on a production line or to monitor parameters during the production process.
​Intelligent monitoring systems: LDS TA-01 may be used in intelligent monitoring systems as a component of data acquisition or processing for environmental monitoring or security systems.
​Sensor networks: When building a sensor network, LDS TA-01 may act as one of the nodes, collecting and transmitting data.
​Data acquisition and processing: In applications that require accurate data acquisition and processing, the LDS TA-01 may be used to collect sensor data and perform preliminary processing.
​Automated Test and measurement: In automated test and measurement equipment, LDS TA-01 may be used for accurate measurement and data analysis.
​Internet of Things (IoT) devices: Among iot devices, LDS TA-01 may act as a bridge between the physical and digital worlds, collecting data and communicating with other devices or systems.
​Environmental monitoring: In environmental monitoring systems, LDS TA-01 may be used to monitor environmental parameters such as temperature, humidity, and air quality.
​Medical devices: In the medical field, LDS TA-01 may be used for the monitoring and control of medical devices, such as in patient monitoring systems.
​Traffic management: In intelligent transportation systems, LDS TA-01 may be used to monitor traffic flow, vehicle speed and other information

About Chengdu Sunshine Xihe Electric Co., Ltd

Chengdu Sunshine Xi He Electric Co., Ltd. specializes in selling the world’s major electrical brand products overseas direct procurement,

genuine inventory, price preferential after-sales warranty, complete models, the same product, not the same price and service.

Large supply of original imported DCS system accessories, PLC system accessories.

Main :ABB, GE Fanuco, Bentl Bentley, Triconex Invensys, Woodward Woodward, Foxboro, Foxboro,

Westinghouse /Emerson, Reliance Ryan, SchneiderModicon, A-B, HIMA dark horse, Motorola MOTOROLA,

Kollmorgen Kollmorgen Bosch/Rexroth/ Bosch Rixon, NI,YOKOGAWA Yokogawa, and other major brands of DCS system accessories,

robot system accessories, large servo system discontinued spare parts.

Contact us freely

BeiLin

| Mobile/wechat：+86 18005021035

Email contact：18005021035@163.com

You may be interested