Product introduction：

Controller:
800xA hardware
The AC 800M controller consists of track-mounted modules, including a CPU, communication module, power module, and various accessories. Several CPU modules are available, which vary in terms of processing power, memory size, SL rating, and redundancy support. 800xA control software
The AC800M control software includes :- firmware, which needs to be downloaded to the controller :- library, which will be used when generating the control application software; Control the application. S800 //O Introduction:
S800 1/0 A complete distributed modular process! The /0 system communicates with the parent controller through the standard fieldbus. Because of its extensive connectivity, it can be used for ABB and its products
It suppliers various process controllers. The system can be installed on site, adjacent to the sensor and trigger, and the wiring cost is low, so the S800I/0 can greatly reduce the installation cost, and the middle trunk has support for hot swap modules, online reconfiguration and redundancy options, the system supports the improvement of production efficiency, and the project profit is greatly improved.
S800 //O features include:
The complete product range is flexible in configuration and installation for easy assembly
· High reliability and accuracy HART protocol validation //O module redundancy
High integration //O module (SIL3 certified) High precision time stamp communication error output setting
VO module with built-in security interface
Choose the right subway
The steps for selecting the correct Metrosi relay type are divided into the following 5 steps :- Step 1- Determine the relevant table of the application with a maximum internal secondary fault current up to 50Arms(usually 1A ct) applicable to Table 1(see page 3). The maximum internal secondary fault current up to 150 arms (generally 5A ct) applies to Table 2(see page 3). The difference between 1A and 5A devices is based on the curved fault current requirements. Using a is acceptable for 1A Metrosi devices with 5A CT or vice versa, as long as the rated secondary fault current does not exceed all other parameters set reasonably.
Step 2- Determine the Metrosil type from the ‘typical relay set voltage, range and’ rated maximum current ‘, determine the recommended Metrosil type from Table 1 or Table 2 using columns 2 and 5, find a relay set voltage close to what you need, if your set voltage is low dry for the given example voltage, The corresponding leakage current will be reduced if necessary, and these values can be more accurately determined in the third and fourth steps. For 1A CT, it is necessary to decide whether the unipolar or tripolar (three-phase)Metrosil type is required.

The O3EC HENF442581R1 is a system control unit produced by ABB that is commonly used in industrial automation control systems to play a key role in signal processing and protection. This module is mainly used to isolate the input signal of the field equipment from the control system, to protect the control system from external interference or damage, and to ensure the accuracy and stability of signal transmission

The module has the following features:
Independent signal channels are provided, and each channel is electrically isolated between and from the power supply to prevent signal interference and current backflow.
The ability to convert raw signals from field equipment (such as voltage, current, or temperature) into standard signals that can be recognized by the control system (such as 4-20mA or 0-10V).
Designed to provide high-precision signal measurement and stable signal output, ensuring that the control system can receive and process data accurately.
Built-in overload protection and transient voltage suppression protect the control system from overvoltage and overcurrent damage.
Adaptable and capable of handling multiple types of input signals, suitable for a wide range of industrial applications.
Modular design, easy to install and maintain, can be quickly replaced or expanded system functions.
Compatible with ABB’s PLCs and DCSs systems as well as other brands of control systems

The P5EAa HENF206350R2 is a high-performance control module manufactured by ABB that is part of a Programmable logic controller (PLC) or distributed control system (DCS). Designed for industrial automation, this module provides precise control and adjustment functions to improve production and processing efficiency.

The P5EAa HENF206350R2 controller module has the following features:
Rugged construction for harsh industrial environments and reliable performance.
Easy to install and use, with simple controls and intuitive user interface.
Provides high precision control and adjustment capabilities
It is suitable for the regulation and control of various industrial processes, including metallurgy, petrochemical, power, mining, cement and steel

In terms of technical specifications, the module may support input voltage of 24V DC, output voltage of 24V DC, maximum output current of 10A, and operating temperature range between -20 ° C and +60 ° C. The overall size is about 180mm × 150mm × 80mm, and the weight is about 1.5kg

The G3ENa HENF450268R2 is an output module from ABB designed for industrial automation applications with fast response, high precision and high efficiency. The module provides a continuous voltage or current (4-20mA) signal for precise control of shop floor actuators such as fluid control on valves, variable speed motors and temperature controllers. It features high precision DAC, resolution range and reliable performance in harsh environments, while also having programmable capabilities that allow users to program a variety of logic and automation controls

The ABB G3ENa HENF450268R2 module also has a variety of safety features, such as overload protection, short circuit protection and overheat protection, which can automatically cut off power and send an alarm in the event of an error, effectively protecting equipment and personnel. It is suitable for a variety of industrial automation application scenarios, including mechanical manufacturing, chemical, power, textile, etc., can meet the needs of different users, and has the characteristics of easy installation and maintenance, with a long service life and low failure rate

INICT03A is a computer transmission module produced by ABB, which is mainly used to realize data transmission from Infi-Net to computers. This module supports a +5 Vdc power supply with a maximum power consumption of 10W and is typically used with ABB Bailey Infi 90 and Net 90 systems
. The INICT03A module measures 7.0 inches x 2.0 inches x 13.0 inches (17.8 cm x 5.1 cm x 33.0 cm) and weighs approximately 1 pound 4.0 ounces (approximately 0.6 kg).

The INICT03A Control Network (Cnet) is a high-speed data communication channel between nodes in the Symphony™ enterprise management and control system. Cnet provides a data path between the Harmony control Unit (HCU), Human Machine System Interface (HSI), and the computer with high system reliability and availability. The module enhances reliability with redundant hardware and communication media, with backups automatically taking over in the event of a primary server failure. In addition, it makes extensive use of error checking and message validation to ensure accurate communication of critical process data

The power supply of the INICT03A module is 12V DC, the data transmission speed is high, and the operating temperature range is -10°C to 60 °C. It has efficient data transfer capabilities, ensures a safe and protected connection during data transfer, and is equipped with a user-friendly interface that is easy to operate. In addition, the module supports a variety of computer systems and operating platforms, ensuring a wide range of compatibility

About Chengdu Sunshine Xihe Electric Co., Ltd

Chengdu Sunshine Xi He Electric Co., Ltd. specializes in selling the world’s major electrical brand products overseas direct procurement,

genuine inventory, price preferential after-sales warranty, complete models, the same product, not the same price and service.

Large supply of original imported DCS system accessories, PLC system accessories.

Main :ABB, GE Fanuco, Bentl Bentley, Triconex Invensys, Woodward Woodward, Foxboro, Foxboro,

Westinghouse /Emerson, Reliance Ryan, SchneiderModicon, A-B, HIMA dark horse, Motorola MOTOROLA,

Kollmorgen Kollmorgen Bosch/Rexroth/ Bosch Rixon, NI,YOKOGAWA Yokogawa, and other major brands of DCS system accessories,

robot system accessories, large servo system discontinued spare parts.

Contact us freely

BeiLin

| Mobile/wechat：+86 18005021035

Email contact：18005021035@163.com

You may be interested