Product introduction：

The V7768-312001 350-9301007768-312001-A0 is a single board computer (SBC) manufactured by GE General Electric, which is commonly used in industrial automation, test and measurement, military, and aerospace
. This single-board computer is a form of VMEbus (VMEbus), a high-performance industrial bus standard widely used in embedded systems that require high reliability and real-time performance

The single-board computer may be equipped with a high-performance processor, such as an Intel Core series or other RISC processor, providing powerful computing and processing power
. It has a variety of I/O interfaces, including USB, Ethernet, serial port, parallel port, etc., to meet the requirements of different application scenarios
. In addition, the V7768-312001 350-9301007768-312001-A0 supports functional expansion through the Processor Mezzanine Card (PMC) or other expansion slots to add additional I/O interfaces or processing modules

In terms of design, the single-board computer uses industrial-grade components and design to ensure stable operation in harsh environments and meet high reliability requirements
The modular design makes installation, replacement and maintenance easy
It may support dual-band WiFi (2.4GHz+5GHz), wireless communication features such as Bluetooth, and wired Ethernet connectivity. In addition, industrial communication protocols such as RS485 and CAN may be supported

Applications of the V7768-312001 350-9301007768-312001-A0 include, but are not limited to, line control and monitoring in industrial automation, data acquisition and analysis in test systems, and control systems in the military and aerospace fields
. It also has over temperature protection, over current protection, fault diagnosis and positioning and other functions to ensure the stability and security of the system

The D20 EME 2400-21004 is a substation control card manufactured by GE Grid Solutions as part of the D20 family of control modules. The control card is versatile enough to process and monitor critical data in the power system, including voltage, current, power, frequency, and phase, and to execute complex control logic such as relay protection algorithms, fault location, isolation, and recovery strategies, and optimize power distribution

The control card supports a variety of communication protocols such as IEC 61850, Modbus, DNP3, etc., ensuring seamless integration with SCADA systems, EMS and other automation devices
. The built-in high-speed processor and large memory allow it to process large amounts of data in real time, while storing critical event records and historical data

The D20 EME 2400-21004 is designed with a redundant architecture to improve system reliability and availability. It also includes security features such as encrypted communications, access controls, and security audits to protect power systems from malicious attacks and unauthorized access
. In addition, the control card is adaptable and capable of stable operation in the harsh environments of substations, including extreme conditions such as high temperature, low temperature, humidity and electromagnetic interference

The D20 control module consists of two detachable modules: the WESDAC D20K and the WESTERM D20K. The WESDAC D20K is responsible for processing the collected data and communicating with the main D20 processor, while the WESTERM D20K consists of terminal blocks for terminating field wiring
. D20K is a 32-point control output interface module, 32 output drivers can be configured according to different system requirements for a variety of hardware/software, to ensure the safe operation of the control output interface

The D20 EME 2400-21004 is a substation control card manufactured by GE Grid Solutions as part of the D20 family of control modules. The control card is versatile enough to process and monitor critical data in the power system, including voltage, current, power, frequency, and phase, and to execute complex control logic such as relay protection algorithms, fault location, isolation, and recovery strategies, and optimize power distribution

The control card supports a variety of communication protocols such as IEC 61850, Modbus, DNP3, etc., ensuring seamless integration with SCADA systems, EMS and other automation devices
. The built-in high-speed processor and large memory allow it to process large amounts of data in real time, while storing critical event records and historical data

The D20 EME 2400-21004 is designed with a redundant architecture to improve system reliability and availability. It also includes security features such as encrypted communications, access controls, and security audits to protect power systems from malicious attacks and unauthorized access
. In addition, the control card is adaptable and capable of stable operation in the harsh environments of substations, including extreme conditions such as high temperature, low temperature, humidity and electromagnetic interference

The D20 control module consists of two detachable modules: the WESDAC D20K and the WESTERM D20K. The WESDAC D20K is responsible for processing the collected data and communicating with the main D20 processor, while the WESTERM D20K consists of terminal blocks for terminating field wiring
. D20K is a 32-point control output interface module, 32 output drivers can be configured according to different system requirements for a variety of hardware/software, to ensure the safe operation of the control output interface

The WESDAC D20ME 18-MAR-13 is an industrial Ethernet gateway module manufactured by GE Digital with a variety of functions, including protocol conversion, analog expansion, remote control and monitoring. The module CAN convert Modbus RTU/TCP, PROFIBUS DP/PA, CAN and other industrial protocols into Ethernet protocols, such as TCP/IP, UDP/IP, and realize the communication between different protocol devices

The module has high-precision and high-reliability analog input and output functions, which can realize high-precision signal conversion and processing. It uses high-performance circuit design and material selection to ensure high module reliability and stability to meet the needs of continuous operation of industrial processes
WESDAC D20ME 18-MAR-13 is simple in design, easy to install and use, and can improve work efficiency.

Provide a variety of communication interfaces, easy to connect and communicate with other devices, to achieve remote control and data transmission. In addition, the module is scalable and can be connected and combined with other devices to facilitate system integration and expansion

Usually, the module also has a safety function, which can detect abnormal or out-of-range signals and take appropriate measures to ensure the safety and stability of the system
. WESDAC D20ME 18-MAR-13 is widely used in industrial automation control systems, as well as in equipment or components with specific needs in specific industries or application areas

The WESDAC D20ME 18-MAR-13 is an industrial Ethernet gateway module manufactured by GE Digital with a variety of functions, including protocol conversion, analog expansion, remote control and monitoring. The module CAN convert Modbus RTU/TCP, PROFIBUS DP/PA, CAN and other industrial protocols into Ethernet protocols, such as TCP/IP, UDP/IP, and realize the communication between different protocol devices

The module has high-precision and high-reliability analog input and output functions, which can realize high-precision signal conversion and processing. It uses high-performance circuit design and material selection to ensure high module reliability and stability to meet the needs of continuous operation of industrial processes

WESDAC D20ME 18-MAR-13 is simple in design, easy to install and use, and can improve work efficiency. Provide a variety of communication interfaces, easy to connect and communicate with other devices, to achieve remote control and data transmission. In addition, the module is scalable and can be connected and combined with other devices to facilitate system integration and expansion

Usually, the module also has a safety function, which can detect abnormal or out-of-range signals and take appropriate measures to ensure the safety and stability of the system
. WESDAC D20ME 18-MAR-13 is widely used in industrial automation control systems, as well as in equipment or components with specific needs in specific industries or application areas

Contact us freely

BeiLin

| Mobile/wechat：+86 18005021035

Email contact：18005021035@163.com

You may be interested