WES5120 2340-21004

Product introduction：

The WES5120 2340-21004 is a power module manufactured by General Electric (GE) and widely used in industrial automation control systems, such as GE’s Mark VIe wind turbine control system. It has a wide range of applications in wind power, oil and gas, chemical, power and manufacturing industries

The power module has the following features:

It can provide a stable DC power supply for PLC (programmable logic controller), I/O (input/output) modules, communication modules and other field equipment.
High quality power supply design and circuit protection ensure stable operation and long life in industrial environments.
Designed with power efficiency in mind to reduce energy consumption and operating costs.
Modular design, easy integration into existing control systems, easy maintenance and replacement.
May include overload protection, short circuit protection, overheat protection and other functions to prevent system damage caused by power failure.
Designed for use in industrial environments with a level of protection against vibration, dust and temperature changes.
Power modules are usually designed to be easy to install, usually installed in the control cabinet, and relatively simple to maintain

In addition, WES5120 2340-21004 May also have intelligent management functions such as remote monitoring and fault diagnosis, adopt energy-saving technology and long life design, use high-quality components, and extend service life
. The high efficiency, low noise and low EMI characteristics of this power module make it ideal for medical devices, and may find applications in the automotive and aviation fields

WEA13-13 2508-21001 is an industrial automation control module produced by General Electric (GE) company, specifically, it is an isolated analog output module
. This module provides isolated analog output signals, common output types include 0-10V, ±10V, 4-20mA, or 0-20mA, which can be used to control external devices such as motor drivers, valves, meters, or actuators
. The isolated output helps prevent noise or power surges on the signal lines from affecting the control system, while also avoiding current loops that can occur between different ground reference points, enhancing the overall stability of the system

Modules may have multiple independent analog output channels, each of which can be configured with a different output range to meet different control needs
. In addition, the WEA13-13 module may support a variety of industry standard protocols, such as Modbus, EtherCAT, Profinet, etc., for easy integration with various control systems
. Designed for industrial environments, it can withstand high temperature, vibration, electromagnetic interference and other harsh conditions to ensure stable operation in a variety of environments

WEA13-13 2508-21001 module is widely used in various industrial automation scenarios, such as process control, manufacturing production lines, energy management, building automation, etc., for achieving accurate closed-loop control
. In addition, the module has a high power and high voltage range, which is suitable for high-performance output, ensuring the accuracy and stability of the signal, and meeting the high precision requirements in fields such as industrial automation
. It also offers high reliability, ease of configuration and use, strong compatibility, and multiple protection features

UFC760BE41 3BHE004573R0041 is an interface board from ABB that is built on ABB Universal Drive architecture with a compact modular design for flexible and optimized cabinet assembly
. This interface board may have the ability to continuously regenerate up to 100% of power, with a total harmonic distortion typically of 3% at rated conditions, and support for grid control, such as for grid converters (UFC760BE1142 for R8i frames)

In addition, ABB UFC760BE41 3BHE004573R0041 is also described as a PROFIBUS DP slave station module for ABB AC800F PLC systems, which can be connected to the PROFIBUS DP master station module and provide data communication and control functions. It has 1 channel, a bus rate of 192 kbps, supports up to 31 master stations, uses the PROFIBUS DP 9-pin D-SUB interface specification, is IP20 protected, operates in a temperature range of -20°C to +60°C, and has an average time between failures of more than 10,000 hours

The 5SHX1960L0006 is a smart sensor module produced by ABB with a variety of functions and application areas. Here are some details about this module:

In the field of energy and power: This smart sensor can be used to monitor and control various devices and steps in the system, such as wind turbines, transformers, distribution systems, etc., to improve energy efficiency and reduce energy waste by monitoring the operating status of equipment and the parameters of the power system in real time

Manufacturing: In equipment such as automated production lines and robots, the sensor improves production efficiency and human resource utilization by monitoring parameters such as the position and speed of robots in real time

Traffic transmission: Sensors are used to monitor the status of vehicles, roads, traffic lights and other equipment, and improve the safety and efficiency of traffic transmission by real-time monitoring of the operating status of vehicles and road smoothness and other parameters

Environmental monitoring: In the field of environmental monitoring, the sensor is used to monitor air quality, water quality, noise and other environmental parameters, through real-time monitoring of changes in environmental parameters, timely detection of environmental problems and take appropriate measures

Automated warehouse: In the automated warehouse, the sensor is used to monitor the location, quantity and other parameters of the goods, through real-time monitoring of the status and location of the goods, to achieve automated management and sorting of the goods, improve the efficiency and accuracy of warehouse management

In addition, the 5SHX1960L0006 May also have thyrior control capabilities for precise control and regulation of power systems or circuits, with high reliability, high electromagnetic immunity, and a simple control interface with state feedback AC or DC supply voltage for mid-frequency and wide temperature range optimization

The PP886 3BSE092980R1 is a standard panel produced by ABB with the following technical specifications and features:

Product model: 3BSE092980R1, belongs to ABB PP886 series

Screen type: 1280×800 widescreen (16:10) display, suitable for applications requiring a wide field of view display

Configuration requirements: Configuration is required by Panel Builder 800 Version 6.2, a panel configuration software from ABB

Protection Suggestion: To protect the front panel, the RX886 Touch cover is recommended

Product size: 410 mm width, 286 mm height and 61 mm net depth, net weight 4.15 kg

Environmental standards: comply with the RoHS standard of EU Directive 2011/65/EU, which belongs to WEEE Category 2 and applies to electronic equipment containing screens

Battery information: Contains a lithium-ion battery, type push-button battery, weighing 2.5g

Operating temperature range: -10°C to +60°C, protection class IP65, suitable for use in a variety of industrial environments

Interface and connectivity: 2 10/100 Base-T Ethernet ports (RJ 45), 2 USB 2.0 ports and serial ports (RS232, RS422/485, RS485)

Hardware configuration: Includes ARM9 processor (1 GHz), 1 GB main memory, and 2 GB SSD, of which 1.5 GB can be used for application storage

The PP886 3BSE092980R1 panel is suitable for multiple control system integrations-including 800xA, Compact Product Suite, and Freelance systems-with easy-to-use HMI capabilities and multiple connectivity options. Enables flexible integration into existing or new automation projects

Contact us freely

BeiLin

| Mobile/wechat：+86 18005021035

Email contact：18005021035@163.com

You may be interested